Infrared temperature measurement system in substation

1、 Demand analysis

A large part of unpredictable accidents in substations are caused by aging or failure, and their performance is that the temperature before the accident is much higher than usual. Therefore, if you can grasp the temperature of the equipment when it is working, you can predict before the accident and take effective measures in advance to reduce the loss to.

2、 Working principle

The substation infrared temperature measurement system uses the infrared detector to receive the infrared radiation energy distribution graph and reflect it on the photosensitive element of the infrared detector. The opto mechanical scanning mechanism scans the infrared thermal image of the measured object and focuses on the unit to display the infrared thermal image. Timely find and locate potential problems of power network equipment. This non-contact monitoring and measurement method is not affected by various complex factors, which reduces the risk of manual inspection and improves the monitoring and monitoring efficiency of the substation.

3、 Technical parameters

1. Technical parameters of infrared mountain fire sensor:

Uncooled 384 * 288-640 * 480 pixels

Universal components, complete interfaces, convenient for user integrated development;

Multiple lens options

RS485 control mode, built-in PELCO-D/P control protocol;

With gray alarm function, the alarm level can be set;

At least 64 temperature measuring points shall be selected;

The temperature measurement accuracy is less than+/- 2 degrees;

1080P camera is used for visible light;

Adopt the design of PTZ and double windows.

2. Technical parameters of visible light camera:

Imaging device: 2.0MP 1/2.9 IMX322

Effective resolution: 1920 (H) * 1280 (V)

System format: PAL/NTSC

Day and night mode: external control (default)/automatic/color/black and white

Video output: RJ45 (1080P)

Signal to noise ratio: ≥ 80dB

Illumination: 0.001LUX

Backlight compensation (BLC): AUTO

Automatic electronic shutter (AES): AUTO/1/50 (1/60) - 1/100000sec

IR control input voltage: DC 3V-8V

OSD function: optional

Lens size: 2.8-12mm

Infrared distance: 200M

Working voltage: DC12V/80mA ± 6mA (wide voltage 9V-18V)